Hazardous Location Products

CSA® approved hazardous location products are featured this month. Conax Technologies' hazardous location products meet U.S. and Canadian standards (NRTL/C, CSA) for use in hazardous locations as defined by NEC Class 1, Divisions 1 and 2, Groups B, C & D; Class II, Divisions 1 and 2, Groups E, F & G; and Class III.

RTD and Thermocouple Assemblies for Hazardous Locations

 

Key Features:

• CSA approved in the U.S. and Canada
• For use in Class 1, Divisions 1 and 2, Groups B, C, and D, Class II, Divisions 1 and 2, Groups E, F, and G, and Class III
• Available in all thermocouple calibrations
• Available with stainless steel or Inconel™ sheaths

 

 

Available in RTD assemblies with 100, 200, 500 and 1000 ohm platinum, 10 ohm copper or 120 ohm nickel elements

Furnished with a termination head with integral connection strip

Two mounting options are available:

• Direct Mount - for mounting into a mating female port
• Spring Loaded - for mounting into a thermowell or other closed end port

Hazardous Location (HL) Conduit Seal         Key Features: CSA approved in the U.S. and Canada For use in Class 1, Divisions 1 and 2, Groups B, C, and D, Class II, Divisions 1 and 2, Groups E, F, and G, and Class III Pressure rated to 500 psig Suitable for gas, liquid and dust Temperature range from -4°F to 130°F (-20°C to + 55°C) Two body styles - (1/2" NPT) and (3/4"NPT) Supplied with 14, 16 or 18 AWG TFN/THHN/THWN wire Can also be ordered without wires for field assembly SST components with internal high performance soft sealant Order factory assembled for quick and easy field installation No messy potting compounds which require extended curing cycles

(주)다일아이비씨 DAIL, IBC.

www.dailibc.com