초 고온 초 고압에서의 누설방지용 Compression Seal Fitting Solutions

 

초 고온 초 고압에서의 누설방지용 Compression Seal Fitting Solutions

 

 

( 실링 일람 : 아래의 각각의 글을 클릭하면 상세내용을 보실 수 있습니다. )

 

*Single Element Sealing

Use these products when you need to seal a single element such as a temperature probe, tubewell, pipe, etc. These products are capable of sealing on items made of materials such as metal, glass, ceramic or plastic.

Packing Gland (PG) Series

• For sealing on anything from fragile tubes and soft cables to solid probes or instruments
• Element diameters range from 0.040" (1.0mm) to 1.50" (47.5mm) pipe

Midlock ( MK ) Series

• Best used for sealing on metal elements and/or high vibration environments
• Element diameters range from 0.040" (1.0mm) to 1.50" (47.5mm) pipe

Electrode ( EG ) Series

• Fully isolating for electrical power or instrument isolation to 2000V
• High pressure, high temperature and current capabilities

 Electrode Teflon ( EGT ) Series

• Fully isolating for bare electrical power leads or instrumentation isolation to 8000V
  
• Teflon insulation and sealant material for high performance and chemical resistance

 Split ( PGS ) Series

• Seals cables and leads when larger probes or connectors are attached

          See Split (PGS/SPG/DSPG) Series in Multiple Element Sealing section – pages 64-67

* Multiple Element Sealing With Factory Installed Leadwires
Use these products when multiple wire feedthroughs are required to carry power or instrumentation signals into pressure or vacuum environments.
These compression seal fittings are manufactured with factory installed leadwires.

 

(아래의 각각의 글을 클릭하면 상세내용을 보실 수 있습니다. )

 

 

 High Density ( HD ) Feedthrough Series

• Conax Technologies can custom design a sealing solution to meet your exact requirements
• A compact and reliable wire sealing design - does not use epoxy or potting
• Seals from 12 to 60 wires per unit, 24 AWG, Teflon insulated

 

 High Pressure ( HPPL ) Series

• For sealing on power leads or instrument leads in high pressure environments
• For applications with pressures to 30,000 psi (2,070 bar)

 

 High Pressure ( HPEG ) Series

• For sealing on electrodes in high pressure environments
• For applications with pressures to 20,000 psi (1,290 bar)

 

 Power Lead ( PL ) Series

• For high performance sealing from 1 to 18 larger gage wires sizes 8 to 20 AWG
• http://www.dailibc.com/board/bbs/board.php?bo_table=sub02020&wr_id=26&page=0&sca=&sfl=&stx=&sst=&sod=&spt=0&page=0

 

Transducer Gland Teflon ( TG24T ) Series

• Utilizes 24 AWG Teflon insulated copper or thermocouple leads rated at 100VDC
• Seals up to 24 Teflon insulated, 24 AWG instrument leads per fitting to 8000 psi (551 bar)

 

 Transducer Gland Fiberglass ( TGF ) Series

• Utilizes fiberglass insulated thermocouple wire for applications > 450°F (232°C)
• Seals up to 24 high temperature insulated 20/24 AWG wires per fitting

 Transducer Gland Fiberglass ( TGM ) Series

• Utilizes fiberglass insulated thermocouple wire for applications > 450°F (232°C)
• Seals up to 24 high temperature insulated 20/24 AWG wires per fitting

 

* Multiple Element Sealing – Without Factory Installed Lead Wires

Use these products when you want to seal multiple elements of the same or different diameters such as metal tubing, ceramic or rigid plastic tube or pipe, temperature probe, a tubewell, low voltage instrumentation wire or a power supply feedthrough. These compression seal fittings are generally manufactured without factory installed leadwires.

 

(아래의 각각의 글을 클릭하면 상세내용을 보실 수 있습니다. )

 

Transducer ( TG ) Series

• For bare wire sealing where elements remain fully electrically isolated throughout the fitting
• Seals up to 16 solid wire conductors in wires sizes from 8 to 24 AWG

 

 Multi-hole Ceramic ( MHC ) Series

• Non-isolating fitting for multiple elements up to .125” (3.0mm) diameter
• Seals 1 to 16 elements – adjustable immersion length for each element

 Multi-hole Metal ( MHM ) Series

• Flexible design for special hole patterns, irregular shapes and mixtures of element sizes
• Seals 1 to 27 elements - adjustable immersion length for each element

 Split ( PGS ) Series

• For sealing elements that can pass through gland body but not the internal components

 Split ( SPG / DSPG ) Series

• For sealing elements that can pass through gland body but not the internal components

 

 

 Sensor Wire Seal ( BSWS ) Series

• Designed specifically for sealing on sensor leads in low temperature and pressure apps
• Ideal for embedded bearing temperature sensors, vibration sensors and proximity probes

 

 

* Application Specific Assemblies
• Products in this section are for special use applications that Conax Technologies has custom designed.
• Conax Technologies can provide the innovation you require to produce a custom design for your application.

 

(아래의 각각의 글을 클릭하면 상세내용을 보실 수 있습니다. )

 

Fiber Optic ( FSA / FCA ) Gland Series

 

 

FSA is for sealing fiber optic cable inside a stainless steel sheath and without using epoxy

 

FCA is for sealing fiber optic terminations

 

* Special Assemblies – Custom Engineered Solutions

 

In this section are examples of special use products designed for custom applications
Conax Technologies can custom design a sealing solution to meet your exact requirements

 

Hazardous Location (HL) Gland 
The HL Gland is designed for sealing conduit wires in a wide variety of hazardous environments.
CSA Certified in the U.S. and Canada

 

 
HAST Feedthroughs for the Semiconductor Industry
Conax Semiconductor specializes in high quality wire sealing in demanding   applications such as Highly Accelerated Stress Testing (HAST) typically done in the semiconductor industry.

 

High Density (HD) Thermocouple Feedthrough for Thermal Validation or

Mapping of a Pharmaceutical Freeze Dryer, Sterilizer or Lyophilizer

Designed to provide a sealed penetration into Freeze Dryers, Sterlizer or Lyophilizer for thermal mapping and operational/performance qualification of the process.semiconductor industry.

 

 

 
PG Soft Cable Double Sealant
Conax PG gland is modified to accept standard PG sealants inserted into the gland back-to-back and compressed with a shortened follower.

 

 

 
PG9 Gland with Steam Jacket for Sealing Sulfur Analyzer Probes
This compression seal fitting is designed to seal on an analyzer probe of various thickness

 

 

 
Autoclave Assembly for the Aerospace Industry
This product is a custom-designed hybrid of Conax Electrode Gland (EG) series and Conax Electrode Gland Teflon (EFT) series designs. It was customized to the needs of an aerospace composite parts manufacturer.

 

 

 

Brass Feedthrough Fitting for the Automotive Industry
This product was designed for use as a wire seal on after market air suspension products for performance automotive use. In addition to the automotive industry, other industries such as aerospace, transportation and industrial machinery, find these types of sealing solutions very useful.

 

 

Process Analyzer Sample Probe Assembly (SPA) with a Conax Packing (PG) Compression Seal Fitting
The Sample Probe Assembly (SPA) is used to hot-tap a probe into a process through a process isolation valve. Optional materials for the Sample Probe and the Conax Packing Gland (PG Gland) body (wetted components) are available

 

Conax Buffalo Technologies 는

Conax Technologies 의 옛 명칭입니다.

 

한국 총판 (주)다일아이비씨

www.dailibc.com